ADDING A 'LOOP' TO THE STEPS / PROGRAMME |
|
V.Ryan © 2005 |
|
Change Pilot 3 by adding a LOOP |
|
|
|
Download the programme and run it. You should find that the buggy moves forwards and backwards continually, every time either micro-switch is pressed.. The programme LOOPS. |
|
WHAT SHOULD HAPPEN? |
|
The buggy is placed between two barriers approximately 30 cm apart. It has been programmed to move forward until the front micro-switch is pressed. Then it should stop and reverse. When the back micro-switch is pressed the RCX buggy should stop and move in the opposite direction. This happens continually (Loops). |
|
|
|
BACK TO ROBOLAB INDEX | |
|
|